regras para mikrotik + thunder onde devo editar para integrar na minha rede

por gabrielnet40 Sex 19 Abr - 13:11

boa trade galera, fiz a intalaçao do tunder 3.1 de tudo certo mais tou com uma pequena duvida nas regras onde devo editar para intergar na minha rede.Eu utilizo o hotspot
ip do tunder 192.168.10.2
minha rede 10.1.x.x

regras

/ip firewall filter
add action=accept chain=forward comment="Acepta thunder 3.1.x" disabled=no \
src-address=192.168.10.0/30
/ip firewall nat
add action=dst-nat chain=dstnat comment="Redirect Thunder 3.1.x" disabled=no \
dst-port=80 protocol=tcp src-address=!192.168.10.2 to-addresses=\
192.168.10.2 to-ports=3128
/ip firewall mangle
add action=mark-connection chain=postrouting comment="THUNDER CACHE FULL(TC 3.\
1.x) =======================================================================\
===============================" content="X-Cache: HIT from Thunder" \
disabled=no new-connection-mark=thunder-connection passthrough=yes \
protocol=tcp src-address=192.168.10.2
add action=mark-packet chain=postrouting connection-mark=thunder-connection \
disabled=no new-packet-mark=thunder-packs passthrough=yes
add action=mark-connection chain=postrouting comment="(TC 3.1.x)=========\
==========================================================================\
==================================" content="X-Cache: HIT from proxy.routero-os.com" \
disabled=no new-connection-mark=proxy-hits passthrough=yes src-address=192.168.10.2\
protocol=tcp
add action=mark-packet chain=postrouting connection-mark=proxy-hits disabled=\
no new-packet-mark=proxy-squid passthrough=yes
/queue tree
add burst-limit=0 burst-threshold=0 burst-time=0s disabled=no limit-at=0 \
max-limit=4M name="T-cache_hits" packet-mark=proxy-squid parent=\
global-out priority=4 queue=default
add burst-limit=0 burst-threshold=0 burst-time=0s disabled=no limit-at=0 \
max-limit=4M name=ThunderCache packet-mark=thunder-packs parent=\
global-out priority=4 queue=default

valeu