[problema com thundercache7 e hotspot no mikrotik v5.4]

galera socorro!!!

estou passando um drama aqui, instalei tudo certinho fiz com uma rb 750 que tinha aqui de teste. só que quando vou colocar o servidor pra rodar em uma rb 450g que é a que tá meus clientes ñ consigo acho que seja alguma configuração com o hotspot que tenho uso ele em defalt com raidius do mk-auth.


desde já agradeço qualquer ajuda...

minha licença é ads

minhas regras

LAN - 192.168.100.1/24
LINK - 186.253.146.161/29
THUNDER_CACHE - 192.168.254.2/30



/ip firewall nat

add action=dst-nat chain=pre-hotspot comment="REDIRECT THUNDER" disabled=yes \
dst-address=!192.168.254.2 dst-port=80 hotspot=auth in-interface=LAN \
protocol=tcp src-address=192.168.100.1/24 to-addresses=192.168.254.2 to-ports=\
8080

/ip firewall mangle
add action=mark-connection chain=postrouting comment="Marca com e sem TOS" \
disabled=no dscp=12 new-connection-mark=n-cache passthrough=yes protocol=\
tcp src-port=8080
add action=mark-packet chain=postrouting comment="Libera Cache Full" \
connection-mark=n-cache disabled=no new-packet-mark=Cache-Packet \
passthrough=yes
add action=mark-connection chain=postrouting comment="" disabled=no dscp=!12 \
new-connection-mark=s-cache passthrough=no protocol=tcp src-port=8080
add action=mark-connection chain=postrouting comment="THUNDER CACHE 3" \
content="X-Cache: HIT from Thunder" disabled=no new-connection-mark=\
thunder3-connection passthrough=yes
add action=mark-packet chain=postrouting comment="" connection-mark=\
thunder3-connection disabled=no new-packet-mark=thunder3-packs \
passthrough=no
add action=mark-connection chain=forward comment="CACHE HITS" \
content="X-Cache: HIT" disabled=no new-connection-mark=forward-hits \
passthrough=yes
add action=mark-packet chain=forward comment="" connection-mark=forward-hits \
disabled=no new-packet-mark=cache-hits passthrough=no
add action=mark-connection chain=postrouting comment="CACHE SQUID" disabled=\
no dscp=12 new-connection-mark=CACHE-SQUID passthrough=yes protocol=tcp \
src-port=8080


/ queue type

add name="cache" kind=pcq pcq-rate=4800000 pcq-limit=50 pcq-classifier=dst-address pcq-total-limit=2000


/queue tree
add burst-limit=0 burst-threshold=0 burst-time=0s disabled=no limit-at=0 \
max-limit=0 name="01 - CACHE-FULL" packet-mark=Cache-Packet parent=\
global-out priority=2 queue=cache
add burst-limit=0 burst-threshold=0 burst-time=0s disabled=no limit-at=3M \
max-limit=100M name="02 - THUNDER CACHE 3" packet-mark=thunder3-packs \
parent=global-out priority=8 queue=default
add burst-limit=0 burst-threshold=0 burst-time=0s disabled=no limit-at=512k \
max-limit=8M name="04 - CACHE-SQUID" packet-mark=cache-squid parent=\
global-out priority=2 queue=default
add burst-limit=0 burst-threshold=0 burst-time=0s disabled=no limit-at=3M \
max-limit=100M name="03 - CACHE SQUID HITS" packet-mark=cache-hits \
parent=global-out priority=2 queue=default

vc fez o redirecionamento pelo nat ou mangle?

estou querendo redirecionar via nat porem com regras de mangle pra rodar o cache full



teria como vc ageitar essas regras de redirecionamento pra mim?



lembrando que



LAN: 10.150.1.1/24

ISP: 186.235.149.161/29

THUNDER: 192.168.254.2/30

houve exageros no queue tree e erro de ip para o thunder! e não precisa aquilo tudo no nat! eu uso rb-750g 680ghz e thunder 7.1 em ads funcionando redondamente bem! e nunca ouvi fala em coloca queue tree / CACHE-SQUID usando o thundercache 7.1 eu usava isso com o thundercache 3.1